Below is our new 7 1/2" gauge chassis, powered by one or two 750 watt 24 volt DC permanent magnet motors. Length is 44" long, wheels are 7" diameter on the tread and are to IBLS standards, axles are 18" apart, the axles is 1" diameter. The chassis is constructed of 3/8" thick steel. This style chassis can be adjusted to 7 1/4" gauge if needed, any additional changes like the distance between the axles or add on gussets, holes, length, can all be changed to your requirements, just message me with any questions and we will do our best to quote the changes.This listing is for the single motor setup, No motor controls included but can be added in if needed. I can ship this chassis if you can't pick it up.Price is $2400.
Chassis is ready to rock and roll, their are plenty of holes to mount body, the holes are 1/4 dia on the top and ends of the chassis. Chain and sprocket size of the motor is 25, the sprockets and chain connecting the two axles is 35 the distance between the axles is 13 inches. , wheels are IBLS standards. Springs are 70 lbs per spring, axles are 3/4 dia. with 3/16 keyway running the total length of the shaft. the bearing block rides on brass, the whole chassis weigh is 73 lbs.The wheel thread dia. is 5-1/4 with a 2 degree angle. Chassis total length is 28.5 inches X 16" wide X 7.5" from flange to top, 7.25" from track to top, frame height is 6". The motor is a 750 watt 24 volt DC motor with plenty of pulling power with a 4 to 1 sprocket ratio to axle, The chassis will ride on our 20 foot diameter track set, but preferably on our 30 and 40 foot dia. track set, wheels can be moved in closer for tighter curves by adjusting the split colars. Chassis is painted with primer to help show the details, they come in black.
Last one sold Testimonial
Everything looks great. I was able to put the chassis together with a piece of plywood etc the other day and take it around the track. It really goes fine, I'm very impressed with how well it goes, even up 5% grade. I realize I was only pulling one car but no problems.
Price is $975.00
Made on Earth - USA
Christopher Machine Mfg. 17877 St. Clair Ave.,Cleveland OH,US,44110 Call:216 383-9199 Email:firstname.lastname@example.org